PVC on interlock cotton lining. Length: 27 cm. Thickness 0,90 mm.
Support: interlock cotton.
Coating: 100% cured and vulcanised PVC.
EN420:2003+A1:2009 General requirements
| 5 | Dexterity (from 1 to 5) |
EN388:2016 Protective gloves against mechanical Risks (Levels obtained on the palm)
| 3 | Resistance to abrasion (from 1 to 4) | |
| 1 | Resistance to cutting (from 1 to 5) | |
| 3 | Resistance to tear (from 1 to 4) | |
| 1 | Resistance to puncture (1 to 4) | |
| X | Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F) |
EN ISO 374-1:2016 Protective gloves against dangerous chemicals and micro- organisms - Part 1: Terminology and performance requirements for chemical risks.
| TYPE | C | Type C - Water and air tightness according to EN374-2:2014. Permeation resistance to at least 1 chemicals at level 1 according to EN16523-1: 2015 (from 1 to 6). |
| . | Determination of resistance to degradation by chemicals according to EN374-4: 2013. Part 4: Determination of resistance to degradation by chemicals. | |
| K | 6 > 480 mn | Caustic soda 40% (K) CAS 1310-73-2 |
EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements against micro- organisms risks.
| BACTERIA + FUNGI | . | BACTERIA + FUNGI : Water and air tightness according to EN374-2:2014. |
Îți respectăm confidențialitatea. Nu vom partaja datele tale și nu vei primi spam. Te vei putea dezabona oricând.
